AMSOIL Authorized Dealer
Blog
November 16, 2026·used oil analysis report

How to Take a Used-Oil Sample and Read an Oil Analysis Report

Published by SyntheticsTX, independent AMSOIL dealer #5533650. Technical sources are linked in the article; vehicle requirements and current product terms take precedence.

Start with the decision the report needs to support

An oil analysis report is easier to use when you decide what question it must answer: is the lubricant still fit for service, and is the equipment showing a problem? AMSOIL defines oil analysis as chemical testing of a lubricant sample to assess both the lubricant and the components it touches. The lab returns a report with a short explanation and service recommendations. [1]

The report is more than a wear-metal count. AMSOIL says the lab tests for wear-metal concentration, fuel dilution, total base number (TBN), oxidation and other information. The report includes application information, elemental analysis and recommendations; detail depends on the kit. [1] KIT01 and KIT06 list 24 metals by ICP, fuel dilution and soot for engines, water by crackle, viscosity at 100°C for engines or 40°C for non-engines, oxidation/nitration and acid number for non-engines. [2] [3]

Match the kit to the fluid before you sample

KIT01 and KIT06 are lubricant kits that AMSOIL says can be used for all drivetrain fluids. KIT09 is only for coolant. [2] [3] [4]

Oil Analyzers kit options and their listed uses
KitUse it forWhat AMSOIL listsSource
KIT01Engine oil and drivetrain fluids24 metals by ICP; fuel dilution and soot (engines); water by crackle; viscosity at 100°C (engines) or 40°C (non-engines); oxidation/nitration; acid number (non-engines). Includes 3-oz. bottle, USPS First-Class mailer, sample form and instructions. [2]
KIT06Engine oil and drivetrain fluidsSame test menu; includes bottle, mailer, form and instructions, but no prepaid postage. [3]
KIT09Coolant only17 metals by ICP; pH; glycol percentage (ethylene or propylene glycol); freeze point; boil point; nitrite; SCA number; total dissolved solids; specific conductance; total hardness; visual examination. Includes 3-oz. bottle, UPS pre-paid mailer, form and instructions. [4]

AMSOIL’s Oil Analysis category also lists KIT02 (UPS pre-paid), KIT18 (all-in-one), KIT14 (value kit), KIT10 and KIT11 (diesel fuel tests), G1206 and G1571. [5] Confirm the test menu on the product page before ordering.

Prepare the engine and the sampling tools

Have the kit, a clean vacuum pump and hose, gloves and a rag ready. [1] Check that the bottle, sample form and instructions are in the kit. KIT01 includes a USPS First-Class mailer; KIT06 includes a mailer but no prepaid postage. [2] [3] The dipstick tube is the usual route in AMSOIL’s example; the drain hole is the fallback. [1]

Warm the engine for a couple of minutes. AMSOIL says the oil does not need to reach operating temperature; warm oil flows through the pump and mixes consistently. [1]

Pull the sample without contaminating it

  1. Idle the engine for a couple of minutes; it need not reach operating temperature. [1]
  2. Thread the clean bottle onto the pump. Connect a clean hose to the top, about the length of the dipstick plus a foot, and tighten the lock ring. [1]
  3. Cut the free end at a 45-degree angle so it feeds into the dipstick tube more easily. [1]
  4. Feed the hose down the dipstick tube to the bottom of the sump, then pull it back about an inch so the tip is not in debris at the pan bottom. [1]
  5. Pump until the bottle is about three-quarters full. [1]
  6. If the dipstick tube is not usable, sample at the drain hole. Let a little oil run out to flush the plug area, fill the bottle from the stream, refit the plug and restore the oil level. [1]
  7. Close and label the bottle, then follow the kit’s shipping directions. [1]

Read the report in three passes

Pass 1: find the severity status

The severity status sits in the upper right of AMSOIL’s example report. The article describes five levels; the table translates them into the next action. [1]

Severity levels and the next action described in AMSOIL’s oil analysis article
StatusWhat it meansWhat to do next
0 (Normal)Oil is suitable for continued service.Keep it in service.
1 (Normal)Oil is suitable, but watch future reports.Keep it in service; compare later samples.
2 (Abnormal)Sample is abnormal, but the oil can stay in service.Take the next sample at half the usual interval.
3 (Abnormal)Needs a new filter and a top-off with fresh oil.Resample at half the usual interval or change the oil.
4 (Critical)Critical result.Change the oil and filter if they were not changed when the sample was taken.

Pass 2: read the comments beside the flagged rows

The comments explain what the lab noticed. In AMSOIL’s example, multi-source and additive metals were highlighted; the comments said additive levels were lower than expected and suggested a top-off with another lubricant, a misidentified fluid, or a different formulation used before a recent change. The engine had been topped off with a different AMSOIL product than the one installed 11 months earlier. [1]

That is the lesson: when a row is highlighted, check what was installed and whether anything was added between changes. AMSOIL notes that mixing lubricants will not harm the engine, but it can disrupt the oil’s chemistry and shorten service life. [1]

Pass 3: turn the status and comments into a decision

Use the severity status for the immediate action and the comments for context. If it calls for a resample, follow the stated interval. If it calls for a filter change and top-off, do that before resampling. If it calls for an oil change, change the oil and filter if they were not changed when the sample was taken. [1]

Keep the report with the equipment record. AMSOIL says oil analysis documents equipment history and performance and can help maintain resale value. The Severity 1 guidance refers to future trends; the next report is easier to interpret when this one is on file. [1]

Confirm the replacement product for the exact application

If the report leads to an oil change, confirm the replacement for the exact application. AMSOIL’s Product Lookup lists auto, light truck, motorcycle, ATV, UTV, snowmobile, marine outboard, PWC, heavy-duty on-road, heavy-duty off-road and agriculture as separate guides. [6] For fleet records, the related small-fleet oil maintenance checklist covers record-keeping. Use the AMSOIL Product Lookup to confirm the product.

Sources

Official AMSOIL pages retrieved November 16, 2026. This guide summarizes them.

  1. AMSOIL Blog, How to Perform Oil Analysis (April 25, 2023): sampling, report sections and severity.
  2. AMSOIL, Oil Analyzers Test Kit, Postage Pre-Paid (KIT01): test menu and contents.
  3. AMSOIL, Oil Analyzers Test Kit, Non Postage Paid (KIT06): test menu and shipping.
  4. AMSOIL, Coolant Testing Kit, UPS Pre-Paid (KIT09): coolant-only test menu and contents.
  5. AMSOIL, Oil Analysis category: kit formats.
  6. AMSOIL, Product Lookup: application categories.

Original AI-assisted SyntheticsTX guide, November 16, 2026. SyntheticsTX is independent AMSOIL dealer #5533650 in Georgetown, Texas. This guide is based on the cited official AMSOIL materials; it was not authored or approved by AMSOIL. No firsthand testing, customer outcome or product endorsement is claimed. Product details and program terms can change; verify current information with AMSOIL.

Ready to Make the Switch?

Use official AMSOIL Product Lookup to check your exact vehicle and engine. This dealer-attributed link does not guarantee a discount; confirm product requirements and current account terms.

SyntheticsTX is an independent AMSOIL dealer. AMSOIL manages all billing, fulfillment, and shipping directly.

© 2026 SyntheticsTX | Esteban Alvarez, Georgetown, Texas | Dealer #5533650